Poquoson marsh at sunset
Cheyenne's signature specialty

Mold & moisture red flags
what I spot before you pay for an inspection

Hampton Roads is coastal and humid, and moisture problems are common here. Cheyenne Bouyea knows the warning signs to look for on a showing, so you don't spend time and money inspecting a house that was never going to work.

Photo: “Sunset near Poquoson” by Yangiskan, CC BY-SA 3.0 · Wikimedia Commons
The basics

It's a moisture problem first

EPA puts it simply: "The key to mold control is moisture control." Mold won't grow without water or moisture, and if the water problem isn't fixed, mold usually comes back. So on a showing, Cheyenne is really looking for water: where it gets in, where it collects, and where the air holds too much of it.

Red flags Cheyenne looks for on a showing

  • A musty smell with no visible source. EPA says you may suspect hidden mold "if a building smells moldy, but you cannot see the source."
  • Water stains on ceilings, walls and around windows, and soft or discolored drywall.
  • Condensation on windows, walls or pipes, a sign of high humidity, and rust on drain pipes, which EPA calls an indicator of condensation.
  • The air conditioner: clogged drip pans or drain lines, and signs of moisture around the air handler and ductwork.
  • The outside: gutters that need repair, and ground that slopes toward the foundation instead of away from it.
  • Bathrooms, laundry and kitchen: fans and dryers that don't vent outside.
  • Fresh paint or caulk over one spot. EPA says not to paint or caulk moldy surfaces.
  • Crawlspaces and attics (her own experience, not an official checklist): standing water, damp insulation, and signs of leaks around the roof and pipes.

What this is, and what it isn't

Cheyenne isn't a home inspector, and this isn't an inspection. She helps you decide whether a house is worth inspecting at all. When you're under contract, a licensed home inspector and the right specialists take it from there.

Testing

EPA says that "in most cases, if visible mold growth is present, sampling is unnecessary," and there are no federal limits for mold. If sampling is needed, EPA says experienced professionals should do it.

Big jobs need pros

EPA's rule of thumb: mold covering less than about 10 square feet can usually be handled by the owner; more than that, or a lot of water damage, calls for professional guidance.

Indoor humidity

EPA's guide recommends keeping indoor humidity below 60%, ideally between 30% and 50%. A humidity meter is an inexpensive way to check.

What Virginia law says

  • Buying: Virginia's disclosure form is "buyer beware." It advises buyers to do their own due diligence, including a home inspection and "a mold assessment conducted by a business that follows the guidelines provided by the U.S. Environmental Protection Agency."
  • VA loans: VA lists Virginia as a state where wood-destroying insect (termite) information is required statewide before it issues the Notice of Value. Here, the moisture and termite inspection usually happens about halfway through the contract.
  • Renting: Virginia landlords must disclose any visible evidence of mold in the move-in inspection report. If there is, the tenant can choose to end the tenancy, or stay while the landlord remediates within five business days.

A plain-language summary, not legal advice.

Sources (checked Oct 14, 2026): EPA: A Brief Guide to Mold, Moisture and Your Home · EPA: Mold testing or sampling · Virginia Department of Health: Mold · Va. Code § 55.1-703 · Va. Code § 55.1-1215 · VA: local requirements (wood-destroying insects)

Questions?

Ask Cheyenne Bouyea about a house

Send the address or listing, and Cheyenne will tell you what she'd look for.

Photo: “Sunset near Poquoson” by Yangiskan, CC BY-SA 3.0 · Wikimedia Commons